ORIGINAL ENERVENT LTR 3 | PINGVIN filters ISO Coarse 70 % (M5)

ORIGINAL ENERVENT PINGVIN M5 -  FILTERSET

The filter package includes:

• 6 x M5-filterclass airfilters
• Filtration class ISO Coarse 70% (M5)
• Dimensions 208x432 mm
• Application: Supply air and exhaust air

The filter pack is suitable for all Enervent PINGVIN ventilation machines.
Models include, for example, Pingvin 60, 85 and 120, (eco, EDE,, KS, E, EP, EKS, EPKS).

ACCESSORIES

Conveniently add the accessories you need to your order by selecting them and marking the quantity:

Supply air filter F7
The standard filters in the Pingvin machine are G4 flat filters, but the use of the F7 additional filter has proven to be very popular and justified, especially in summer or in conditions where the outdoor air has a lot of pollutants.
The F7 filtration class filters smaller pollution particles from the air than the G4 class.
If you want to improve the filtering level, e.g. due to pollen allergies, also choose the more efficient F7 fine filter in your order.

Original heat exchanger drive belt
Enervent Pingvin is a rotating cell ventilation device and a drive belt is needed to rotate the cell. If the belt is damaged or worn, it may cause problems in the operation of the device. Especially in older people, the belt tends to slip, especially in winter when it's cold.
If you need a new strap, add one to your order by marking one of the accessories.

Cell detergent
The operation of the heat recovery cell is essentially affected by its cleanliness. Likavex cleaning agent is a dilutable detergent suitable for cell washing and many other cleaning purposes.

• When changing filters, it is good to check the cleanliness of the heat exchanger as well
• If the cell is dirty, remove it from the machine and wash it by immersing it in water with cell detergent.

CLEANING AND REPLACEMENT OF FILTERS

Regular cleaning and replacement of the ventilation machine's filter is essential not only for the operation of the machine, but also for good indoor air.
The recommended replacement interval for filters is a maximum of four (4) months. Pull the filter cartridges out of the device and remove the filter cloth from the frame.
Put a new filter cloth in the frame. Press the filter cartridge back into the machine so that the support net points towards the heat exchanger.
When changing the filter, it is recommended to vacuum the inside of the device.

Note! Close the door locks carefully.
 

GOOD INDOOR AIR

When the indoor air is of high quality, it is dust-free, odor-free, draft-free and tasteless! It is somehow "non-existent", because it is not necessarily immediately recognizable. But everyone recognizes its effects positively in themselves.
Contrary to good indoor air, bad indoor air can be recognized very quickly. Filters are the most important parts of ventilation systems and significantly affect indoor air quality.
For this reason, it is worth investing in the replacement and quality of the filters, in order to minimize harmful air pollution and particles from the outside air and thus improve the health effect of the indoor air.

ENERVENT PINGVIN BASIC MAINTENANCE